Which Kind Of Car Wash Is Best For Your Vehicle?

Like there’s multiple ways to prepare an egg, there are various kinds of automobile washes. They are available nearby with the help of Don’t think that this will be a sign that all washing methods are alike. Far from it. Each method has each of its own advantages and drawbacks. These pros and cons however, can be a bit hazy. We’ve compiled a list of pros and cons to help you review every method of washing in detail, separating the good and bad to help you understand the most important aspect of car maintenance.

Method #1: Handwash

Talk to any detailing professional and they’ll inform you of the most secure method to wash your car. is to hand-car wash. There are a variety of methods that a handwash is done with a variety of options, from the traditional two-bucket method , to the more modern pressurized foam cannons however, regardless of the method you choose the same thing is that you (or your detailing professional) cleaning the water using soap and then washing your vehicle using an easy-to-handle mitt. What do you think of a handwash? At our detailing shop, Simon’s Shine Shop, we begin with a pre-wash that involves covering the car with snow foam, then wash the vehicle off. It’s not absolutely necessary but it does help us to get a thorough clean. Then, we cover the car with another layer of suds. is then agitated using gentle wash gloves. The foam breaks down the contaminants down, while the wash mitts aid in breaking them up. Then, we rinse and dry. This kind of washing requires plenty of time, along with a wide range of equipment, and , if you’re hiring an expert, a little of cash. However, between how soft it’s on the surface and how effective it is in removing any heavy contaminants, it’s by far the most effective type of car wash that you can perform.


  • Reduces scratching
  • Can remove heavy contamination


  • It takes longer than other methods.
  • Much more expensive than automated washes
  • It requires more equipment than other methods.
  • It requires a lot of water
  • It is difficult to accomplish this with a small space
  • The task is difficult in colder temperatures.

Method #2: Waterless Wash

A waterless washing requires one spray bottle, and some microfiber towels. Simply spray the surface with the waterless cleanser and wipe the surface using a microfiber towel. Waterless washes are used by people for many reasons. For instance, they don’t have enough space to wash their hands and they aren’t able to wash with water, they’re in the middle of a road trip, etc. It’s basically an option of the last choice. Why’s that? The reason is that waterless washes don’t work good at getting rid of heavy gunk. They’ll get rid of dust however, if you’ve just returned from a dirt trail, you’re unlikely to have much success. Another disadvantage is the possibility of scratching. While waterless products are specifically designed to coat the surface with lubricant but they’re not quite as close to the slickness that comes from an foamy handwash. So, there’s an excellent chance that you’ll get up and move a small particles across your surface which can cause scratches.


  • It’s not as long as handwash or rinseless wash
  • It is possible to do this with a limited space
  • Doesn’t make use of water.
  • It only requires a waterless washing item and towels made of microfiber


  • More opportunities for scratching
  • Can’t remove heavy contamination

Method #3: Rinseless Wash

A rinseless wash is distinct from a waterless wash. In a sense it’s like an amalgamation of handwash and waterless wash. In a wash that is rinseless it’s a matter of taking a small amount of your rinseless washing item and pour it in an ice bucket. There won’t be any suds. That’s the reason you don’t have to rinse. The only thing you have to do after washing an area is clean it to dry. Rinseless washes are done using wash mitts or microfiber towels. A lot of detailers prefer this method “Garry Dean Method”, that involves soaking a number of microfiber towel in buckets that is filled with rinse-free wash products and water. One microfiber towel is taken then squeeze it dry and then set it aside to dry. After that, you spray the panel with a product that has been pre-washed and then grab a wet microfiber towel to begin cleaning. You grab your drying towel, then dry the panel and the final step is to grab a new dry microfiber to complete dry process. Repeat the process panel-by-panel until your car is spotless. Rinseless washing is a method that is preferred by people who are under water restrictions or who have limited space that are also concerned about the scratching that a waterless washing could cause. The method still causes more scratches than handwashes, but significantly less than a handwash. It won’t be able remove the heavy dirt as you would by handwashing.


  • Could be quicker than handwashing
  • It requires less water than a handwash
  • It requires less equipment than handwashing
  • It is possible to perform the task with a limited space
  • More resistant to scratching than a wash that is water-free


  • A handwash is more likely to cause scratches than handwash
  • Can’t remove heavy contamination
  • This requires greater equipment and tools than simple waterless wash

Method #4: Automatic Wash

Automatic car washes
Also called “tunnel” washes, generally require you to drive your car onto conveyor belts, which will lead you through a set of blowers and brushes. The bristles on these brushes are usually contaminated by the abrasive residue of previous vehicles that can ruin the finish. They also use harsh cleaning chemicals that could strip coatings and waxes, or even dry out your paint which can cause cracking and even becoming faded. So , why would anyone wish to utilize any of them? It’s simple: they’re cheap and take a short time to complete and are the most well-known type of wash due to their ease of use. Many people either don’t understand or care about how much they’re damaging their paintwork. It’s not necessarily a bad thing for professional detailers. All scratching causes many people pay for painting correction!


  • Inexpensive
  • Fast


  • Causes excessive scratching
  • Harsh chemicals can damage finish
  • Might not be able to remove heavy contamination

Method #5: Brushless Wash

A “brushless car wash” is a type of automated wash that makes use of strips soft cloths instead of bristles to clean its machine. It’s possible that it can solve the problem of bristles that are abrasive tearing your finish, but dirty cloths are just as susceptible to scratching the same way as bristles. The dirt left by the thousands of vehicles which came before yours can cause damage to the finish. Additionally the washes use similar harsh substances that we have mentioned earlier.


  • Inexpensive
  • Fast
  • Abrasive less than a traditional brush wash that is automatic


  • Causes severe scratching
  • Harsh chemicals can damage finish
  • Might not be able to remove heavy contamination

Method #6: Touchless Wash

A “touchless car wash” cleanses your car without the brush or bristles. Instead the entire wash is carried out using chemical cleaners, pressure washers, and pressurized air. This sounds like it can solve every issue with other automated washes, doesn’t it? But it’s not quite that simple. First, you’ll still have harmful chemicals to contend with. If you don’t want to dry your paint or strip the coating or wax, ensure you are aware prior to the time what chemicals they’re making use of. Be aware that brushless washes as well as touchless washes can be

It’s not

The identical. A few people hear “brushless” and assume that it means “touchless”. Avoid the mistake! Make sure you do your homework prior to purchase and ensure you’re using the correct kind of wash.


  • Handwashes are less expensive than handwashes.
  • Fast
  • Reduces scratching


  • Costlier than automatic and brushless washes.
  • Chemicals that are harsh can damage the finishing
  • Might not be able to remove heavy contamination

Other Methods

We’ve seen people wash their cars using just about anything you can think of, including paper towels and Windex. Of course, not because you
Doesn’t mean that does not mean
It is recommended to
. If it’s not an everyday practice it’s likely there’s some reason for that. Whatever ingenuous method you come up with the likelihood is that it will harm your finishing. It’s not worth it.

Our Verdict

The most effective way to clean the finish of your vehicle is a handwash.

It’s the most gentle wash you can do without sacrificing quality. However, as with everything in life, sometimes , the optimal isn’t the case. So , what’s second-best (and third fourth, fifth, as well as sixth)? This is our list:

  1. Handwash
  2. Touchless wash (if using gentle soap)
  3. Rinseless wash
  4. Waterless wash
  5. Brushless wash
  6. Automatic wash

Agree? Disagree? Let us know in the comments below!

Related Articles

Back to top button